Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

More problems with self-adhesive brake shims... 900 1993

posted by  Brian S on  Fri Apr 30 09:45 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

If any of you have recently installed front brake pads with self-adhesive shims, you might want to check 'em out and make sure the shims are still in place.

There was a recent thread about the same problem: 945 slipped brake pad shim/rotor damage (photos) - what went wrong? At that point, I had just installed new pads & shims (made by Beck/Arnley, sold to me by FCP Groton)... everything seemed to be working OK.

Couple days ago, with just 600 miles on the new pads & shims, I had the front wheels off, and yikes!



The backs of the pads were clean & grease-free when I stuck on the shims. Both sides looked like that. I called FCP and emailed them the pics, and sent them the link to the previous thread... hopefully they'll stop selling those shims.

- Brian '93 945T






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New More problems with self-adhesive brake shims... [900][1993]
posted by  Brian S  on Fri Apr 30 09:45 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.