As Per the bently manual, I attached ohm meter probe to pin #2 at the cpu, and the other to ground. With the throttle closed I read 2.2 ohms. With the throttle opened I read 22 ohms. short? Bad tps?
The manual says continuity at closed throttle, no continuity at open throttle.

The symptoms: car starts and dies. It does this epecially when hot. But even when cold , it doesnt die, but I feel that its not running properly.

Car starts fine if I crack the throttle open.

Then it runs and idles fine once Im on the road.

Whats going on?

Lawrence