Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust pipe heat shield removal - what tools? 200 1985

posted by  Ken of CT on  Thu May 1 12:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 19 17:54 CST 2009
[RELATED]

The heat shields on the exhaust pipe of my '85 240DL rattle (the one at the bend where the pipe comes down from the manifold to the underside, and the one immediately aft), especially when I start the car or when accelerating. I've tried the method of tightening hose clamps around them, but it needs frequent retightening, and is not completely effective.
I know some guys just remove the shields. What tools are needed, and are there any things to watch out for?
Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Exhaust pipe heat shield removal - what tools? [200][1985]
posted by  Ken of CT  on Thu May 1 12:53 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.