Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2011 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stainless steel brake lines for 140s ? 140-160

posted by  Volvocentric on  Mon Apr 28 18:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm planning on the Mother Of All Brake Jobs on my '70 145.
The left rear calliper is locking when I'm braking at highway speeds.
I have another set of rear girlings and will rebuild those and install them in the back. Since I'm breaking into the system I'm installing rebuilt callipers in the front.
Seems silly to do all this and leave the same 33 year old hoses on.
I was looking at the stainless steel brake lines that IPD has, for every Volvo other than the 140. Grrrr.

Has anyone had any luck installing the kit for the 160 series on the 140?
I cross-checked the part numbers for the rubber hoses on alloemvolvoparts.com.
The 140 has 3 different part numbers:
Rear N7000-63778
Front outer N7000-30495
Front inner N7000-29351

The 160 only lists 1 part number for all the hoses; N7000-63778 the same as the 140 rear.
(I'm assuming theres 6 of them like on the 140)

Has anyone had any luck installing the stainless steel brake line kit for the 160 series on the 140?
Is there any other source for stainless steel brake lines for the 140?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stainless steel brake lines for 140s ? [140-160]
posted by  Volvocentric  on Mon Apr 28 18:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.