Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2008 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

122 soft pedal 120-130 1967

posted by  dvavak on  Mon Apr 21 10:49 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 1967 122s with single curcuit braking system. I replaced the Master cylinder because the old one needed to be pumped 2 times for full pressure. Before I replaced it I bled the system 3 times - but didn't help. Their were no leaks anywhere in the system. Now I have the new MCyl. on and the same thing is happening. I have bled the system 3 times and adjusted the rear shoes - but still no change. I am usibg ATE super blue in the car now. The emerg brake pulls up about 5-6 clicks. The car stop very nicely and stops straight. Any ideas? Does the brake pressure valve on the single system 122 ever go bad? Thanks - dvavak@tconl.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 122 soft pedal [120-130][1967]
posted by  dvavak  on Mon Apr 21 10:49 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.