Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2003 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cylinder #1 low power ? 1800

posted by  Viper1800e on  Sun Apr 6 13:38 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi.

Just started my motor for the first time after a rebuild. It started and seems to run OK. After breaking in the cam I took it out for a little spin. I noticed the header on #1 cylinder pipe did not get as hot as the rest. I took an IR thermometer and if the rest are 600 deg F. #1 is 200 deg at best. I disconnected the fan for a bit thinking it may be cooling the pipe better than the rest but it made no differnce. I have rechecked the valve clearance and injector spray, injector grounds, injector pulse with an Oscope, spark, leakdown etc. Changed plug, wire, rotor, cap, timing is 15 btdc . What could cause this and not be effecting the other 3 cylinders,???. Any ideas would be welcome. I can not figure it out and am out of things to try.

Greg Bodner
1970 1800E






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cylinder #1 low power ? [1800]
posted by  Viper1800e  on Sun Apr 6 13:38 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.