Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2020 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1995 960 A/C rebuild 900 1995

posted by  someone claiming to be '95 960 owner on  Tue Apr 1 13:33 CST 2003 [RELATED]

Hi, I am having the a/c rebuilt on my 95 960 sedan and have a few questions. The system has been vacant for three years. The evaporator, a/c filler valve, and O rings were replaced in July 2000. The system died three months later, and I left it. Now, we are replacing the condenser, receiver/dryer/accumulator, flushing the compressor/system hoses, replacing the compressor oil, dye testing for leaks and recharging with R143a. I plan to insist on plastic, stainless steel, or aluminum screws to hold the condenser in the corners. Any ideas what we should do to be sure it's done properly given the length of time the system has been vacant and the known Volvo a/c history? Let me know, thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1995 960 A/C rebuild [900][1995]
posted by  someone claiming to be '95 960 owner  on Tue Apr 1 13:33 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.