Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Strut assembly for 765 T- spacer at the top? 700

posted by  Moose Ribs on  Wed Feb 27 08:49 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I recently replaced the struts on my '87 760T wagon. Now I have a clunk in the front when hitting bumps. I replaced the radius arm cone bushings, but still have the clunk. No other play is apparent in the front end. If I pull on the top of the tire I get side to side movement in the strut housing. Did I miss a spacer in assembling the strut. The KYB's came with a large spacer washer which I put in the bottom of the strut tube. I assumed for the insert to sit in at the bottom of the strut tube. Is this spacer supposed to go on top to center the strut insert? Is there a picture of the parts assembly somewhere? A parts diagram blow up would be great. Thanks. I have done an archive search, but didn't find a clear answer there.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Strut assembly for 765 T- spacer at the top? [700]
posted by  Moose Ribs  on Wed Feb 27 08:49 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.