Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 12/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

motor/xmission mounts ? 200 90

posted by  someone claiming to be Matt McGonegle on  Fri Dec 15 08:09 CST 2000 [RELATED]

Will do this weekend.

Ώ] Is the best method for motor mounts still unbolting bracket bottom, lifting engine, unbolting bracket top and removing brackets and mount? Do I need 2 jacks, one for what the bracket bottom is bolted to and one for the engine(bracket top bolted to)? What part of engine to attach jack for lifting w/o damage?

ΐ] Ordered xmission mount. New is similar in shape to engine mount, original one was rectangular shaped. Should I hold off work till I get replacement xmission mount similar to original? What is procedure for bracing xmission and replacing mount? Should I do this before/after/during motor mounts?

Α] Is there anything else on engine and/or xmission that would be easy to check/replace/fix while I'm doing the mounts?

TIA





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New motor/xmission mounts ? [200][90]
posted by  someone claiming to be Matt McGonegle  on Fri Dec 15 08:09 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.