Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Trailing arm bushing shells and tool request 200 1988

posted by  blue 240 on  Tue Nov 26 20:08 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Anyone have spare trailing arm rear bushing shells for a 1988 244 they are willing to sell?

Earlier today I started to replace my worn trailing arm bushings with brand new poly bushings only to find one of my existing shells to be rusted through. Options follow.

(1) buy a new poly bushings kit that includes new shells 
(2) buy cheap-o standard bushings and burn out the innards saving the new shells to be used with my poly bushings
(3) buy and install standard rubber bushings and throw the poly bushings into my spare parts bin to be used who knows when

Prior to deciding on how to proceed I figured I'd reach out and see if anyone had spare shells lying around. Let me know if you do and if you are willing to part with them.

Also, if you have the trailing arm bushing removal tool and would be willing to loan it out kindly let me know. Otherwise, my plan is to build one just as others have done here.

Best,
Ihor 





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Trailing arm bushing shells and tool request [200][1988]
posted by  blue 240  on Tue Nov 26 20:08 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.