Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2021 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PCV Oil trap 900 1997

posted by  Metallo on  Mon Jun 3 18:48 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 29 21:03 CST 2012
[RELATED]

Hi all,

After 22 years I removed the oil trap just to see if it needed any cleaning... guess what, it did not. :)

However, I have a question for you:

When I have removed the oil trap, there was black sealing material between the bottom of the oil trap and the crankcase.
I am not talking about the green O-ring, it was all over the touching surface of the oil trap with the crankcase.
It is elastic and very difficult to remove with any solvent, similar to dry silicon.

What is that material?
It is factory stuff as I never touched the oil trap before, which means if it was there, has a purpose.

What can I use to replace it?

Thank you,
Alex






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PCV Oil trap [900][1997]
posted by  Metallo  on Mon Jun 3 18:48 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.