Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2000 200 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator 200 1987

posted by California240 on Sun Dec 23 20:37 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS] [RELATED]

Greetings,

I've got an leaky camshaft front seal. The sprocket has circular rings for spokes and the back is flat, so I can't wedge anything through the sprocket for levering. The FAQs and a couple of posts suggest ways to get the bolt holding the sprocket loose. These didn't work for me:

3 foot cheater bar with breaker bar
oil filter rubber strap wrench
holding the old timing belt really hard against the timing belt tensioner stud
using wire and rope
impact wrench
Evertough Timing Gear Holder Kit #67013

Second, I can't find replacement water pump pulley studs. The new water pump doesn't have the studs and the old ones are seized on. Are you supposed to use Loctite on those studs? I tried making one by cutting the head off an M6 x 1.0 bolt, but could not hacksaw the head off smoothly enough to permit the nuts to thread.

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by California240 on Sun Dec 23 20:37 CST 2018 >

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by NewMexico240 subscriber on Sun Dec 23 21:32 CST 2018 > V
- Zip ties? [200][1987]
  posted by 1908242DLa on Sun Dec 23 23:10 CST 2018 > V
- Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
  posted by California240 on Sun Dec 23 23:35 CST 2018 > V
  - Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
    posted by machine man subscriber on Mon Dec 24 01:28 CST 2018 > V
    - Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
      posted by California240 on Mon Dec 24 11:49 CST 2018 > V
      - Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by machine man subscriber on Mon Dec 24 17:42 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by California240 on Mon Dec 24 20:01 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by machine man subscriber on Tue Dec 25 02:13 CST 2018 > V
        
        Stretch Marks [200][1987]
        posted by Art Benstein subscriber on Tue Dec 25 05:25 CST 2018 > V
        
        Stretch Marks [200][1987]
        posted by machine man subscriber on Tue Dec 25 23:53 CST 2018 > V
        
        Stretch Marks [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 11:14 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by California240 on Tue Dec 25 12:41 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by machine man subscriber on Tue Dec 25 23:02 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by California240 on Tue Dec 25 23:26 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 06:26 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by California240 on Wed Dec 26 10:20 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 10:54 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by California240 on Wed Dec 26 11:05 CST 2018 > V
        
        There's nothing wrong with that bolt head. Have at it. I already explained why your breaker bar/socket attempt failed. [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 11:18 CST 2018 > V
        
        There's nothing wrong with that bolt head. Have at it. I already explained why your breaker bar/socket attempt failed. [200][1987]
        posted by California240 on Wed Dec 26 11:31 CST 2018 > V
        
        Practice your swing. You're going for distance! [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 11:44 CST 2018 > V
        
        There's nothing wrong with that bolt head. Have at it. I already explained why your breaker bar/socket attempt failed. [200][1987]
        posted by machine man subscriber on Wed Dec 26 17:15 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by California240 on Thu Dec 27 19:39 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by Volvo From Heck subscriber on Thu Dec 27 22:00 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by California240 on Thu Dec 27 23:38 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by machine man subscriber on Thu Dec 27 23:40 CST 2018 > V
        
        Watch out for the Bentley and so called bibles! [200][1987]
        posted by machine man subscriber on Thu Dec 27 23:15 CST 2018 > V
        
        Watch out for the Bentley and so called bibles! [200][1987]
        posted by Art Benstein subscriber on Fri Dec 28 05:33 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by Art Benstein subscriber on Fri Dec 28 05:56 CST 2018 > V

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by Volvo From Heck subscriber on Sun Dec 23 22:51 CST 2018 > V
- Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
  posted by Art Benstein subscriber on Mon Dec 24 05:40 CST 2018 > V
  - Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
    posted by California240 on Mon Dec 24 11:54 CST 2018 > V
    - Poor man's impact wrench [200][1987]
      posted by Art Benstein subscriber on Mon Dec 24 12:51 CST 2018 > V
      - Didn't work; torch? Permatex around top rubber o-ring of water pump? [200][1987]
        posted by California240 on Mon Dec 24 13:17 CST 2018 > V
        
        Impact technique [200][1987]
        posted by Art Benstein subscriber on Mon Dec 24 14:14 CST 2018 > V
        
        Impact technique [200][1987]
        posted by California240 on Mon Dec 24 14:49 CST 2018 > V
        
        Impact technique [200][1987]
        posted by Volvo From Heck subscriber on Mon Dec 24 14:56 CST 2018 > V
        
        Impact technique [200][1987]
        posted by California240 on Mon Dec 24 16:26 CST 2018 > V
        
        Impact technique [200][1987]
        posted by someone claiming to be CB on Mon Dec 24 17:34 CST 2018 > V
        
        Vise-Chain; B230FT and 940 B230F camshaft interchangeable? [200][1987]
        posted by California240 on Mon Dec 24 20:48 CST 2018 > V
        
        Chain wrench [200][1987]
        posted by Art Benstein subscriber on Tue Dec 25 05:20 CST 2018 > V
        
        Impact technique [200][1987]
        posted by someone claiming to be CB on Mon Dec 24 17:48 CST 2018 > V

Camshaft Pulley Counter Hold - don't break the pin [200][1987]
posted by kittysgreyvolvo subscriber on Wed Dec 26 05:06 CST 2018 > V
- Camshaft Pulley Counter Hold - don't break the pin [200][1987]
  posted by California240 on Wed Dec 26 10:32 CST 2018 > V
  - Camshaft Pulley Counter Hold - don't break the pin [200][1987]
    posted by kittysgreyvolvo subscriber on Wed Dec 26 17:34 CST 2018 > V
- rolled sheet steel pin [200][1987]
  posted by California240 on Thu Dec 27 16:58 CST 2018 > V
  - rolled sheet steel pin [200][1987]
    posted by kittysgreyvolvo subscriber on Tue Jan 1 12:03 CST 2019 > V
    - rolled sheet steel pin [200][1987]
      posted by California240 on Tue Jan 1 12:18 CST 2019 > V
      - rolled sheet steel pin [200][1987]
        posted by Amarin on Tue Jan 1 16:36 CST 2019 > V

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by Bruce S. subscriber on Thu Dec 27 23:28 CST 2018 > V

Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
posted by California240 on Sun Dec 30 19:42 CST 2018 > V
- Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
  posted by Amarin on Sun Dec 30 20:05 CST 2018 > V
- Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
  posted by machine man subscriber on Sun Dec 30 22:31 CST 2018 > V
- Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
  posted by someone claiming to be CB on Mon Dec 31 11:57 CST 2018 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/200 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 200 Forum

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator 200 1987