Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2019 200 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? 200 1987

posted by Amarin on Sun Dec 30 20:05 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Thu Oct 23 22:42 CST 2014

[RELATED]

From those 2 photos, looks like the scratch marks are on the non-contact surfaces of the cam. Cam still good to use.

Maybe I could suggest on how to take out the camshaft bolt by alternative way. Dismantle slowly all the cam bearing caps - all those 13mm nuts along the camshaft. Take the whole camshaft out of the engine - along with the rear plastic timing cover. Put the cam pulley in vise grip - sandwiched by thin woods to protect the pulley. Tackle the stuck camshaft bolt at the vise.

Amarin.

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by California240 on Sun Dec 23 20:37 CST 2018 >

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by NewMexico240 subscriber on Sun Dec 23 21:32 CST 2018 > V
- Zip ties? [200][1987]
  posted by 1908242DLa on Sun Dec 23 23:10 CST 2018 > V
- Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
  posted by California240 on Sun Dec 23 23:35 CST 2018 > V
  - Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
    posted by machine man subscriber on Mon Dec 24 01:28 CST 2018 > V
    - Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
      posted by California240 on Mon Dec 24 11:49 CST 2018 > V
      - Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by machine man subscriber on Mon Dec 24 17:42 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by California240 on Mon Dec 24 20:01 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by machine man subscriber on Tue Dec 25 02:13 CST 2018 > V
        
        Stretch Marks [200][1987]
        posted by Art Benstein subscriber on Tue Dec 25 05:25 CST 2018 > V
        
        Stretch Marks [200][1987]
        posted by machine man subscriber on Tue Dec 25 23:53 CST 2018 > V
        
        Stretch Marks [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 11:14 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by California240 on Tue Dec 25 12:41 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by machine man subscriber on Tue Dec 25 23:02 CST 2018 > V
        
        Camshaft Bolt Stuck Clarification; Wrench Jam in Lobe? [200][1987]
        posted by California240 on Tue Dec 25 23:26 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 06:26 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by California240 on Wed Dec 26 10:20 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 10:54 CST 2018 > V
        
        Impact screwdriver [200][1987]
        posted by California240 on Wed Dec 26 11:05 CST 2018 > V
        
        There's nothing wrong with that bolt head. Have at it. I already explained why your breaker bar/socket attempt failed. [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 11:18 CST 2018 > V
        
        There's nothing wrong with that bolt head. Have at it. I already explained why your breaker bar/socket attempt failed. [200][1987]
        posted by California240 on Wed Dec 26 11:31 CST 2018 > V
        
        Practice your swing. You're going for distance! [200][1987]
        posted by Art Benstein subscriber on Wed Dec 26 11:44 CST 2018 > V
        
        There's nothing wrong with that bolt head. Have at it. I already explained why your breaker bar/socket attempt failed. [200][1987]
        posted by machine man subscriber on Wed Dec 26 17:15 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by California240 on Thu Dec 27 19:39 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by Volvo From Heck subscriber on Thu Dec 27 22:00 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by California240 on Thu Dec 27 23:38 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by machine man subscriber on Thu Dec 27 23:40 CST 2018 > V
        
        Watch out for the Bentley and so called bibles! [200][1987]
        posted by machine man subscriber on Thu Dec 27 23:15 CST 2018 > V
        
        Watch out for the Bentley and so called bibles! [200][1987]
        posted by Art Benstein subscriber on Fri Dec 28 05:33 CST 2018 > V
        
        Worked in Junkyard Twice, but Not on My Jalopy; Ideas? [200][1987]
        posted by Art Benstein subscriber on Fri Dec 28 05:56 CST 2018 > V

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by Volvo From Heck subscriber on Sun Dec 23 22:51 CST 2018 > V
- Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
  posted by Art Benstein subscriber on Mon Dec 24 05:40 CST 2018 > V
  - Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
    posted by California240 on Mon Dec 24 11:54 CST 2018 > V
    - Poor man's impact wrench [200][1987]
      posted by Art Benstein subscriber on Mon Dec 24 12:51 CST 2018 > V
      - Didn't work; torch? Permatex around top rubber o-ring of water pump? [200][1987]
        posted by California240 on Mon Dec 24 13:17 CST 2018 > V
        
        Impact technique [200][1987]
        posted by Art Benstein subscriber on Mon Dec 24 14:14 CST 2018 > V
        
        Impact technique [200][1987]
        posted by California240 on Mon Dec 24 14:49 CST 2018 > V
        
        Impact technique [200][1987]
        posted by Volvo From Heck subscriber on Mon Dec 24 14:56 CST 2018 > V
        
        Impact technique [200][1987]
        posted by California240 on Mon Dec 24 16:26 CST 2018 > V
        
        Impact technique [200][1987]
        posted by someone claiming to be CB on Mon Dec 24 17:34 CST 2018 > V
        
        Vise-Chain; B230FT and 940 B230F camshaft interchangeable? [200][1987]
        posted by California240 on Mon Dec 24 20:48 CST 2018 > V
        
        Chain wrench [200][1987]
        posted by Art Benstein subscriber on Tue Dec 25 05:20 CST 2018 > V
        
        Impact technique [200][1987]
        posted by someone claiming to be CB on Mon Dec 24 17:48 CST 2018 > V

Camshaft Pulley Counter Hold - don't break the pin [200][1987]
posted by kittysgreyvolvo subscriber on Wed Dec 26 05:06 CST 2018 > V
- Camshaft Pulley Counter Hold - don't break the pin [200][1987]
  posted by California240 on Wed Dec 26 10:32 CST 2018 > V
  - Camshaft Pulley Counter Hold - don't break the pin [200][1987]
    posted by kittysgreyvolvo subscriber on Wed Dec 26 17:34 CST 2018 > V
- rolled sheet steel pin [200][1987]
  posted by California240 on Thu Dec 27 16:58 CST 2018 > V
  - rolled sheet steel pin [200][1987]
    posted by kittysgreyvolvo subscriber on Tue Jan 1 12:03 CST 2019 > V
    - rolled sheet steel pin [200][1987]
      posted by California240 on Tue Jan 1 12:18 CST 2019 > V
      - rolled sheet steel pin [200][1987]
        posted by Amarin on Tue Jan 1 16:36 CST 2019 > V

Camshaft Bolt Stuck & Water Pump Pulley Studs Locator [200][1987]
posted by Bruce S. subscriber on Thu Dec 27 23:28 CST 2018 > V

Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
posted by California240 on Sun Dec 30 19:42 CST 2018 > V
- Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
  posted by Amarin on Sun Dec 30 20:05 CST 2018 > V
- Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
  posted by machine man subscriber on Sun Dec 30 22:31 CST 2018 > V
- Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? [200][1987]
  posted by someone claiming to be CB on Mon Dec 31 11:57 CST 2018 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/200 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 200 Forum

Update: Scratched Cam Lobes; Is the Camshaft Still Okay to Use? 200 1987