Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AW-70 transmission removal, 1989+ 240 with LH 2.4 200 1989

posted by  john sargent on  Sun Aug 12 21:49 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

I've recently removed and re-installed the automatic transmission from three 240s with LH 2.4. LH 2.4 uses a tone ring for ignition timing. The tone ring protrudes from the drive plate, and the transmission is very difficult to get out, and re-install over the tone ring. I found that removing the four crossmember bolts, and letting the crossmember and engine assembly hang in the car allowed the transmission to be easily removed and re-installed.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 AW-70 transmission removal, 1989+ 240 with LH 2.4 [200][1989]
posted by  john sargent subscriber  on Sun Aug 12 21:49 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.