Quantcast
RWD - AW-70 transmission removal, 1989+ 240 with LH 2.4

Volvo RWD 200 Forum

INDEX FOR 9/2019(CURRENT) INDEX FOR 4/2005 200 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE   A    A 

AW-70 transmission removal, 1989+ 240 with LH 2.4 200 1989

I've recently removed and re-installed the automatic transmission from three 240s with LH 2.4. LH 2.4 uses a tone ring for ignition timing. The tone ring protrudes from the drive plate, and the transmission is very difficult to get out, and re-install over the tone ring. I found that removing the four crossmember bolts, and letting the crossmember and engine assembly hang in the car allowed the transmission to be easily removed and re-installed.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 AW-70 transmission removal, 1989+ 240 with LH 2.4 [200][1989]
posted by  john sargent  on Sun Aug 12 21:49 CST 2018 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts