Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No brakes when car is running 900 1994

posted by  Sithdad on  Fri Jul 13 21:51 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

My 940 had been sitting for about a year waiting for my daughter to get her license. The front calipers were pretty rusted and were dragging. After trying to clean & lube them I replaced them.

All 4 brakes were bled and they felt like they stiffened up. However, as soon as I started the car the brake pedal went to the floor without resistance. While the car is running and the brake pedal is fully depressed I cannot spin the front wheels. I replaced the master cylinder and re-bled the brakes, but the problem still persists. I tried to see if there was fluid in the booster, but either there isn't any or I'm not able to reach the bottom. The booster hose has vacuum and doesn't appear to have any leaks.

I could really use some help as I'm out of ideas.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No brakes when car is running [900][1994]
posted by  Sithdad  on Fri Jul 13 21:51 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.