Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front crank seal carrier b230f 900 1993

posted by  Oleseahorse on  Fri May 18 07:16 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:45 CST 2014
[RELATED]

Hello Bricksters,

I'm about to begin front seal replacement on the wife's 93 940.

I attempted the job last fall and found the front seal carrier screws loose. Presuming that the oil leak which was not significant was coming from the edge of the seal carrier I tightened up the screws and left the seals alone. Unfortunately the leak has continued and at this time I will replace front seals and seal carrier gasket. However I have never removed the front seal carrier on the b230f and have some apprehension. Can anyone give me any tips or suggestions to ensure there aren't any screw-ups.

Thanks in advance

Marty Wolfson






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front crank seal carrier b230f [900][1993]
posted by  Oleseahorse subscriber  on Fri May 18 07:16 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.