Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bulb Malfunction Indicator Pin Numbers (Bulb Out Relay) 900 1994

posted by  jd620 on  Mon Mar 12 15:56 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

I have been lucky re-soldering several Bulb Malfunction Indicators (Bulb Out Relay) but my luck has run out on one. The cruise control and the brake lights don't work. I had a spare and everything is fine now and I'd like to re-solder the bad relay (again, first time re-soldering didn't fix it) I have the wiring diagram but the pin numbers on the black disc around the pins don't correlate. John Sargent wrote in the FAQS under "Electrical: Circuits, Wiring, Relays, Switches" and under that "Lamp Failure: Bulb Out Relay." "[John Sargent] The solder joint on the board leading to contact 9 (brake light circuit) can fail; resolder this to repair it." The pin 9 referred to corresponds with my wiring diagram brake circuit but I don't know where pin 9 is?

Could it be so simple that the pins are numbered 1 through 13 clockwise or counter-clockwise?

Thanks
--
Mine:4-940s running, 1-740, 2-940 parts, dtrs:3-940s running






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bulb Malfunction Indicator Pin Numbers (Bulb Out Relay) [900][1994]
posted by  jd620  on Mon Mar 12 15:56 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.