Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2022 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Center bearing on driveshaft 700 1988

posted by  Moustacio on  Wed Oct 12 17:56 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all,

Have a 1988 740 turbo wagon with m46 and type 3 driveshaft.

I recently changed the center bearing and carrier along with 2 u-joints on my driveshaft. After taking it down the freeway at around 75mph I can hear what sounds like the center bearing is whining at a somewhat high pitch.

The carrier bolts to the crossmember and can be moved front to back an inch or so. I installed the new one towards the front of the crossmember and pretty sure the old was was installed towards the back.

My question: can this probably incorrect installation cause the whining I hear?

Thank you for any suggestions.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Center bearing on driveshaft [700][1988]
posted by  Moustacio  on Wed Oct 12 17:56 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.