Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

troubleshooting no highbeams 200 1992

posted by  riverbend on  Tue Dec 22 17:34 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

The headlights on my newly revived '92 240 will not switch from low beams to high beams. The high beam indicator does not light up.

Tonight I noticed that if the engine is not running, toggling the dip switch causes the high beams to come on (flash to pass funstion works). The indicator on the dash also lights up.

In both cases, the position the main light switch does not matter.

I swapped a known working dip relay (behind the left headlight) and it did not make any difference.

I looked at the wiring diagram in the Bentley manual, but can't relate the inset diagram of the headlight switch/relays to the main diagram. Does anyone have a better wiring diagram for the headlights ?

Any other ideas on troubleshooting ?

Thanks

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New troubleshooting no highbeams [200][1992]
posted by  riverbend subscriber  on Tue Dec 22 17:34 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.