Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2015 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

960 Passenger Seat Removal if inop 900

posted by  yenna on  Sat Sep 12 09:54 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 7 09:42 CST 2010
[RELATED]

Have found excellent 960 power seats for my 940. Both seats required powering to slide forward to remove two rear mounting bolts. This worked fine for driver's seat, but I am getting no response when power is correctly applied to passenger seat. Nothing - no movement possible in any axis. Question 1: is there a way to remove the two rear bolts if the seat is fully slid back and not powerable? Question 2: is there a likely culprit if there is no seat response at all?

Thanks,
Doug






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 960 Passenger Seat Removal if inop [900]
posted by  yenna  on Sat Sep 12 09:54 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.