Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 front brake hardware 900 1994

posted by  someone claiming to be dummy on  Sat Apr 18 18:36 CST 2015 [RELATED]

Have front brake pad installation problems with a '94 Volvo 940 with ABS and Lucas/Girling 1198 front pads. I got it all apart and cleaned up, new rotors new Axxis metal master 1198 pads and compressed the single piston as far as it can go. I have trouble clearing the 2 hardware studs with the rubber boots....seems I get lined up on the top but not enough clearance on the bottom to put in the second 12mm bolt. http://www.eeuroparts.com/Parts/7486/Disc-Brake-Caliper-Pin-Kit-271350/

Is that hardware kit supposed to slide and compress on those rubber boots ?
Do I need a new hardware kit? This job should be super easy.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 front brake hardware [900][1994]
posted by  someone claiming to be dummy  on Sat Apr 18 18:36 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.