Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

re: 87 245 auto - missing brake valve cap 200 1987

posted by  Swedish Baklava on  Wed Aug 6 20:46 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi All,

About 1 week ago, I was cruising through the streets of Brooklyn. I was going under 25mph. I saw a guy working under his car supported by a tiny scissor jack on the side of the road. It caught my eye because it was jacked up really high on a slight hill. And of course, there was a car standing right in front of me. I had to slam the brake really hard. I mean really hard. I missed it by 1 foot.

Today, I found a missing brake valve cap and had to retighten the bleeder valve by about 90 degree - 120 degree. I went for a test drive and it looks like it stopped the leak/bleeding.

Is it possible to lose a cap because the pressure build up? I am just wondering... I don't suspect a prank. Thank you as always.

photo P8063002_zpsd7e1fc26.jpg
The passenger side is missing.

photo P8063003_zpsa4425d4a.jpg
As you see, this cap is very sturdy.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New re: 87 245 auto - missing brake valve cap [200][1987]
posted by  Swedish Baklava  on Wed Aug 6 20:46 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.