Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bench bleed the brake master after junction block replacement? 200 1989

posted by  Epic2112 on  Tue Feb 18 16:55 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:15 CST 2014
[RELATED]

I posted recently about my junction box replacement. I seem to have that all squared away, but I can't seem to get rid of my spongy pedal. I've bled and bled the brakes, and no bubbles come out at the calipers. Of course, while replacing the junction block all the fluid was emptied out of the master cylinder, reservoir, and brake lines. Do I need to bench bleed the master because of air that's now trapped inside?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bench bleed the brake master after junction block replacement? [200][1989]
posted by  Epic2112  on Tue Feb 18 16:55 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.