Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2017 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

relative merits of different window washer setups 120-130

posted by  Danny on  Fri Jul 26 16:12 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 22:01 CST 2014
[RELATED]

On my '64 122 there exist two holes adjacent to the wiper posts for two spray nozzles. These mount with the water fed ends inside the cab where 1/8" tubing connects and I presume feed into a "T" which is fed from the pump/reservoir. I haven't figured out where this slightly larger tube would feed through the firewall - anybody know?

I've got the reservoir/pump from a later car, and the centrally located hood mounted sprayer, and if I wanted to, I could drill a hole in the hood and use that setup.

Question is, is one preferable over the other? If I use the later setup, I have to plug the two holes that exist in the '64, which I can do, but seeing as I have the two complete spray nozzles, I figured to use what was original, unless there's a reason to "upgrade" to the later style. Any thoughts?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New relative merits of different window washer setups [120-130]
posted by  Danny  on Fri Jul 26 16:12 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.