Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

a handy tip for those who struggle installing banjo bolts and metal splices into nylon fuel lines 200

posted by  trichard on  Thu Jul 25 07:44 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:52 CST 2014
[RELATED]

how many of you have cursed trying to install a banjo fitting onto nylon fuel line?

if you have one of these

http://www.amazon.com/TEKTON-6483-Flaring-Tool-Set/dp/B000NPUKVG/ref=sr_1_1?ie=UTF8&qid=1374759603&sr=8-1&keywords=flare+tool

use the tube holder not the press.

place your nylon tube in the 5/16 hole so enough of the tube sticks out the top to cover the length of the fitting you're trying to install.

lightly oil the fitting and then hand start it in the tube.

now tap tap with a hammer and in 30 seconds its installed with no kinking of the tube.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 a handy tip for those who struggle installing banjo bolts and metal splices into nylon fuel lines [200]
posted by  trichard  on Thu Jul 25 07:44 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.