Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

two 15mm caliper bolts 200

I need to service my wheel bearings on my 91 240 sedan but to do so I must remove the brake caliper. It has two 15mm bolts that are on there like a mother.... I was able to loosen the lower ones on each side but the upper one on either side is so stuck on I'm not sure what to do. I do not own air tools and I don't intend on buying any. I need ideas becase my 12 point socket started to strip one of the bolt heads...I can probably salvage it with a 6 point socket but damn...what is holding it on? I'm a big man and can exhert some serious pressure but my toughness is no match for these bolts (plus they haven't been serviced in years)

If you guys can offer me a tip or two to remove the stubborn bolts I'm all ears..






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New two 15mm caliper bolts [200]
posted by  Indy452  on Sun Jan 6 21:09 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.