Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

two 15mm caliper bolts 200

Try using a metal extension of some sort and a hammer to hit, really hard, the head of the bolt. This will ''shake'' and loosen the threads. Try not to damage the bolt head. I work in the auto repair trade and would recommend never using 12point sockets. Stick with 6 point as they are less likely to let go and strip bolt heads and they will save your knuckles also. Hope this helps and good luck!

-Art
--
Teach a man to fish and he will never go hungry. Teach a man to rob a bank, he will never go fishing again.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New two 15mm caliper bolts [200]
posted by  Indy452  on Sun Jan 6 21:09 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.