Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

One-way valve in breather to manifold line on a turbo - pointless? 700 1990

1990 740 turbo

The title says it all. I think I asked about this a long time ago, before I realized that the large line to the pre-turbo intake would be at negative pressure (at least relatively to the manifold)... so:

Will adding a one-way vacuum valve to the line from the small nipple on the breather box to the manifold do anything? Or is it redundant because the larger line will be an "escape route" to any positive pressure from the manifold?


Cheers
Mr. Curiosity







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.