Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2002 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

broken motor mount bracket bolts 444-544 1958

posted by  Boobtube on  Tue Aug 7 07:37 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 06:19 CST 2014
[RELATED]

I just started the job of changing my motor mounts and to my horror, discovered that two of the bolts that hold the motor mount bracket on the passenger side of the block were missing. Only the top of the triangular bracket has a bolt. So now I must remove what is left of the other two bolts that protruded from the block. Are these double sided bolts that are screwed into the block? What is the method to remove these? I haven't removed the bracket yet to see if they are broken flush with the block or even deeper. Any suggestions welcome. I wonder why they didn't use regular bolts on these brackets rather than having bolts protrude from the block?
PV444--B16






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New broken motor mount bracket bolts [444-544][1958]
posted by  Boobtube subscriber  on Tue Aug 7 07:37 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.