Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Doing the Springs/TAB... 200 1989

posted by  B0RK ^3 on  Fri Jun 29 09:29 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 18:09 CST 2014
[RELATED]

Any words of wisdom before we start this?... Should we use new hardware/bolts? Locktite/Anti-Seize? Does it have to be torqued? Or just "Armstrong?" Just wondering any potential problems we could face.. The car itself doesn't have much rust. But we still PB B'lasted everything..
Is it best to do the bushings first and the springs after? Or doesn't it really matter?... They are IPD Overload springs. Thanks again.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Doing the Springs/TAB... [200][1989]
posted by  B0RK ^3 subscriber  on Fri Jun 29 09:29 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.