Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sway Bar Bushing & Bushing Hardware Questions for 90 244 & 92 245 200

posted by  1990Volvo240 on  Tue Jun 26 15:38 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

I wanted to get new OEM sway bar bushing clamps, brackets with the bushings for that area for both my 90 244 and 92 245. On both cars the bushings in that area are worn along with the brackets being quite rusty.

I measured both sway bars on each car:

1990 244 is 20mm

and

1992 245 is 21mm

Most times I try to get OEM part numbers from either the FCP, eEuroparts, or IPD sites. That didn't work this time. To add to the confusion some of the sites seemed to mention "new style" brackets which puzzled me further. As usual it seems the Tasca site is no help either with their irritating site.

Any help is greatly appreciated.

Thanks,
Travis





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sway Bar Bushing & Bushing Hardware Questions for 90 244 & 92 245 [200]
posted by  1990Volvo240 subscriber  on Tue Jun 26 15:38 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.