Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Finding Leak in 240 a/c 200 1990

posted by  Marlin Mangels on  Mon Mar 19 11:21 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]

Here's what I did today: Remove and drain compressor. Flush lines. Replace all o-rings, dryer, expansion valve. Re-assemble. Draw vacuum for 30 minutes. System didn't hold vacuum for 30 minutes, so I re-tightened all connections and repeated.Questions: Does the compressor oil go in the opening on the top of the compressor or in the high/low hose fittings? Where do I get the black stuff to go around the expansion valve? If it doesn't hold vacuum the second time, can I put the 134a + dye in to look for the leaks? Thanks.
Marlin

(re-post as new thread)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Finding Leak in 240 a/c [200][1990]
posted by  Marlin Mangels subscriber  on Mon Mar 19 11:21 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.