Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rebuilding vacuum system, what is this connector? 200 1980

posted by  drj434343 on  Wed Feb 29 00:28 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 24 09:46 CST 2013
[RELATED]

I'm rebuilding the vacuum line system on my K-Jet B21F. I thought I labeled everything pretty well, but now as I replace all lines with silicon, I find I missed one connector, and am not sure where it connects to.





You can see the nipple in question. This is coming off a check valve connected to a T on the main line that goes between the throttle body and the lower aux air valve. You can see that on this check valve, there is another line that loops back to the throttle body as well. The remaining connector is a mystery.

I've checked the CIS green book sections and can't find a vacuum hose diagram. Anyone have any ideas?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rebuilding vacuum system, what is this connector? [200][1980]
posted by  drj434343 subscriber  on Wed Feb 29 00:28 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.