Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust - Cat to header down pipe 200 1992

posted by  leugim on  Mon Dec 5 11:11 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 20:49 CST 2014
[RELATED]

Thanks for any help

The recent purchase '92 240 is missing the donut at the cat/header downpipe connection. Both sides of this connection are flared somewhat indicating a donut.
It appears the cat side bolt heads are frozen with massive rust, almost looks like studs? or tack welded?. The body of these bolts/studs is all rusted away. I cut them off and now I am trying to get the heads off the cat side flange. Looks like grinding time.

Question - FCP/IPD show the donut and a gasket for sale. It should only need the donut correct?

My '93 has a cobbled together system where half is prepped for donut the other side is flush looking like a gasket was called for. Need to replace all that when the duckets come available.


--
Happy Motoring! 92' and 93' 240's past cars "74 140, '75 140, '86 240, '87 240 wagon, '02 S60.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Exhaust - Cat to header down pipe [200][1992]
posted by  leugim subscriber  on Mon Dec 5 11:11 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.