Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Driveshaft yoke phase/ alignment - in plane or? 200

posted by  jon_h on  Fri Dec 17 13:33 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:57 CST 2014
[RELATED]

I'm trying to find a vibration in my 91 244. More on that in a separate message.

In checking the driveshaft I saw that the driveshaft yokes (the farthest forward and farthest rearward) were perpendicular to each other.

This is how I thought they were supposed to be and how I've always done them. I call this "in phase".

But just in case I checked shop manuals: Bentley and Haynes show them to in the same plane. Haynes shows a picture w/ an X through a perpendicular arrangement.

Back at the driveshaft I saw that the stamped (etched?) factory arrows were lined up as they should be.

Are the manuals wrong or am I missing something?
--
240s: 2 drivers and some parts cars






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Driveshaft yoke phase/ alignment - in plane or? [200]
posted by  jon_h  on Fri Dec 17 13:33 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.