Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Updated Drive Shaft / Center support question 700 1989

posted by  TheJohnG on  Sat Jan 23 07:22 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 7 07:51 CST 2013
[RELATED]

On my '89 760 just ahead of the center support there is a dust cover.
Is this supposed to be pressed into the drive shaft end itself, or is it part of the center support? I would guess the first.

It sure does make a nice loud skimming sound as it hangs, and spins freely on the drive shaft. The Bearing sounds and feels great, and the rubber looks good.

I just need to do something with the dust cover.
Any experience out there?

Thanks a bunch.
John G

Edit for clarity;
I just found this line in the volvoclub.org.uk/faq.
"Don't set the jaws of the puller on the front bearing protector ring that is mounted on the driveshaft; with this method, you will leave that in place."

The protector ring is loose from the drive shaft. Any remedies?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Updated Drive Shaft / Center support question [700][1989]
posted by  TheJohnG  on Sat Jan 23 07:22 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.