Before admitting to a bad O2 sensor, I decided to disconnect it and see if some rough running problems would appear better without it. I disconnected both connectors and then disconnected the battery for a few minutes to clear the ECU. After driving the car for 10 minutes, I got no warning light, no codes and as far as I could tell, no closed loop operation. What's with this? I shut the car off and restarted it, still no codes. Idle was rough, like it was running rich. I reconnected the O2 sensor with the engine running and the idle smoothed out considerably. So I'm back to the drawing board again.
Help!
Ron
93 245
93 944 (new plugs, wires, cap, rotors, FPR, ECT ......)
|