Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No Start 83 B23 200 1983

posted by  AppleTech on  Tue Sep 1 18:36 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Nov 13 14:40 CST 2011
[RELATED]

Looking for some quick pointers...

I just finished doing a HG on my 83 as well as wiring harness repair (Installing new wires from the main firewall connector). Everything is back together but the car is not starting. Here are the facts:

This car is running LH2.0 for reference

- Turns over fine
- Will run with ether sprayed into the intake tube, so the issue is not timing
- Primped pump by jumping it and verified pressure built up - upon loosening main fuel line at the rail I got fuel spraying out, so it did make it up there.
- Main EFI fuse in engine bay is intact and there are no fuses out in the main panel

At this point I'm thinking the injectors aren't firing, but I'm not super familiar with LH 2.0. I have the Bentley book and will dive into testing later this week but I wanted to throw this out there to see if anyone might have an "aha" moment from previous experience.

Thanks!
-Phil






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No Start 83 B23 [200][1983]
posted by  AppleTech  on Tue Sep 1 18:36 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.