Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help - I mutilated 3 cam seals already! 200

posted by  BretC on  Thu Jul 23 16:17 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 22 16:58 CST 2011
[RELATED]


I did the timing belt and seals in another 240 3 years ago so I'm not a total novice, but I am having a heck of a time with this cam seal.

I scraped out the old seal which was nearly petrified and leaking oil all over the water pump. Lubed interior of seal, and camshaft, tried to insert it and it wont go more than half way in.

Pulled it back out, scraped more debris out including the spring from old seal, and tried again. Pressed it in with thumbs, pounded with large socket. It still hangs out more than 1/8 of an inch or so. Read Bentley, brickboard, I don't get it.

--
1985 245 NA, wanna-be dogmobile






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help - I mutilated 3 cam seals already! [200]
posted by  BretC subscriber  on Thu Jul 23 16:17 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.