Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help - I mutilated 3 cam seals already! 200

posted by  Kentucky on  Fri Jul 24 04:09 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 13:01 CST 2014
[RELATED]

Bret,

It sounds to me like you have not removed the old seal. You don't really scrape old seals out, you pull them out. I think you may have pulled the seal material and spring out of the old seal, but the metal ring that contains the seal material is still in there. Clean it up and take a good look. You may have driven the old seal in deeper by trying to install the new one.

Charley






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help - I mutilated 3 cam seals already! [200]
posted by  BretC subscriber  on Thu Jul 23 16:17 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.