Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Question about correct header pipe for 89 240 with EGR 200 1989

posted by  lrisius on  Thu May 28 10:01 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 17 05:59 CST 2014
[RELATED]

Hi,
I've got an 89 240 with EGR. I'm a little confused about the header pipe selection as the EGR pipe actually comes from the exhaust manifold and not from the header pipe. One salesperson I talked to said that the EGR pipe should come from the header pipe but I may have led him down that path in the way I asked the questions. Pictures of the EGR pipes are hard to find. So my first question is whether this is typical for the EGR and whether I need the EGR version of the header pipe?

From looking at previous posts, it appears that the EGR pipes also have a spin flange at the cat end. My car is currently off to the store- how do I tell if I have the spin flange?

Thanks!
Lyle







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.