Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil temp sensor leaks 200 1983

posted by  someone claiming to be Skip on  Sun Aug 10 06:32 CST 2008 [RELATED]

I installed a new Volvo oil temp gauge in my 240T a while ago. I have continued to have a small leak that I didn't have with the the original oil pan plug. a close look at the plug/sendor shows a small taper just under the head of the plug. That seems to prevent me from getting a good "crush" on the copper washer. I have heard that these oil temp kits originally came with an adapter that screwed into the pan and the sensor into the adapter but I can't find any info. Anyone know? An alternative would be to machine off the small shoulder to make it look more like a conventional plug. Thanks

Skip
'83 242TI Flathood
'00 S70 GLT
'02 S60.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil temp sensor leaks [200][1983]
posted by  someone claiming to be Skip  on Sun Aug 10 06:32 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.