Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Temp readings after bypassing compensation board 200

posted by  53charlie on  Thu Jul 17 12:54 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 12:22 CST 2014
[RELATED]

I have removed the compensation board in our '88 244 and bypassed it using the IPD "jumper" kit. I had expected the temp needle to behave like it does in our '85 245 (a little under 9 o'clock position), but I am spooked now because it tends to read towards the hot side. Is this normal or do I need to start looking for cooling problems?

Thank you all!

Charlie
'85 245
'88 244






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Temp readings after bypassing compensation board [200]
posted by  53charlie  on Thu Jul 17 12:54 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.