Have had a no-start on my 1993 245 since an attempted tune-up last week. Here's what I've done and discovered:
1) codes in both #2 socket and #6 socket show 1-1-1.
2) New timing belt,distributor,cam and crank aligned correctly.
3) New crank position sensor
Tests:
1) swapped ICU with one from 1992
2) swapped Radio Suppresent Relay with another (maybe not good also?)
3) Spark (yellow) at both spark plug and coil wire
4) Noid light shows intermittent current at injectors
I will try to swap out ECU later today after work and see what happens.
Anybody have any other suggestions?
Gracias,
el Raidman