Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing belt - no marks to set cam sprocket 900 1994

posted by  someone claiming to be DanO940 on  Sat Apr 14 16:55 CST 2007 [RELATED]

I've read a lot of posts, but can't seem to find an answer. I can't find any marks to line up the cam sprocket with. The crank is set to "0" and after taking #1 sparkplug out, I can see that the episton head is at TDC. However, I have to set the cam sprocket independently, and there are no marks on the engine or plastic rear timing cover to go by. The sprocket has a pre-punched mark, but what do I set it to? Any thought/help would be appreciated.

Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing belt - no marks to set cam sprocket [900][1994]
posted by  someone claiming to be DanO940  on Sat Apr 14 16:55 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.