Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

pre-obd-II 900 1996

posted by  swede-940 on  Mon May 1 07:37 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a -96 945 bought in Sewden which has an obd-II connector between the front seat. The problem is that when I connect an obd-II reader, it wont talk to the ECU. When I looked closer at it, the positions of the metal pins in the obd-ii connector does not comply with the obd-ii standard, although the plug fits. I guess that volvo used the same ECU before and after they went obd-ii compliant, and therefore I wonder if the protocol is the same, but pin positions different? Would it be worth to try to change the pin positions?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New pre-obd-II [900][1996]
posted by  swede-940  on Mon May 1 07:37 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.