Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CAM TIMING AGAIN PLEASE 200

Ok all, thanks for the advice. I still really need a LIVE picture of the front of a B230 engine showing the timing belt with the timing marks visible. Again I have all the drawings of this but really need a PHOTOGRAPH not the drawings out of Chiltons or Mitchells or even the nice one out of Bentley's book. Art, if you are still reading these posts, have you ever taken a shot of the timing area? Thanks in advance.....Max :>)
P.S. I know the marks on the cam and intermediate shafts but the mark on the Crankshaft is throwing me off. Where exactly is the mark on the block, I assume it is the casting line that runs from top to bottom on the lower end of the block as shown in many drawings. I really need a shot of this more than the whole timing setup. Thanks.
--
Max..1989 244 DL 5 Spd., V15 Phase II Cam Bilstein HD, Turbo Swaybars, Poly Bushings all round, Turbo Wheels, Black leather interior, Electric mirrors, LED dash and gauge lights and now NEW ECODES with the turn signals and side marker euro lights, 1992 black 244 next project






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CAM TIMING AGAIN PLEASE [200]
posted by  Maxspeed subscriber  on Fri Feb 17 04:47 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.