Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

All Brake Lights not working--should be simple BUT!! 900 1993

posted by  Bill N. on  Sun Jan 8 14:56 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 16 14:09 CST 2014
[RELATED]

My 940T BRAKE LIGHTS will not function. Fuse is good, bulbs are good but there is NO POWER to Brake Light SWITCH. According to the wiring diagram these wire should be HOT ALL THE TIME but there is No Power to the switch. Since that should be the case, I'm thinking the Bulb Failure Sensor should not make any difference since there's no power coming to the Brake Switch in the 1st place.
Can I just run a wire directly from the Postive side of the battery to supply the power to the brake light switch and be OK. Or is there other simple solution??

Thanks For any insight or tips on this problem

Bill N.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New All Brake Lights not working--should be simple BUT!! [900][1993]
posted by  Bill N. subscriber  on Sun Jan 8 14:56 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.