Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil pan leaking (rust)-- how to fix? 900 1992

posted by  Herb Goltz on  Sat Oct 29 11:28 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Hello All:

My '02 945 Turbo has a leak in the oil pan-- it has pretty extensive rust blisters on it, and one of them is apparently deep enough to cause a leak (my first suspicion was a bad drain plug gasket or the plug itself-- I replaced both and it didn't fix the problem. While I was under there I cleaned off all the oil and crud so I could see better.

After a short drive, I crawled underneath and could see fresh oil seepage from one of the rust blisters on the driver's side.

Anyone encounter this before? Pulling the pan looks like a real headache on these cars. Anybody fix this kind of problem before?

Thanks!
--
Herb Goltz, Aurora, Ontario, Canada '92 245 w/124K mi, '92 945T w/200K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil pan leaking (rust)-- how to fix? [900][1992]
posted by  Herb Goltz  on Sat Oct 29 11:28 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.